WTD - Dogbone

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

Need a dogbone (upper engine mount) for a 2m4. I actually need good rubber bushings as mine have deteriorated. I can almost put a pen in between the bushing and the dogbone when the engine is torqued. So if yours is better than that, I'm interested. 

Any help would be greatly appreciated as I'm hoping to get the car on the road sometime this month.

**Also, when is the next tec day?

**Napa has them, they want $73.55. They catalog them as a front torque strut.  

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Matt Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 09 February 2008 Location: Canada Status: Offline Points: 448	Post Options Post Reply Quote Matt Report Post Quote Reply Topic: WTD - Dogbone Posted: 25 November 2008 at 1:28pm
	Need a dogbone (upper engine mount) for a 2m4. I actually need good rubber bushings as mine have deteriorated. I can almost put a pen in between the bushing and the dogbone when the engine is torqued. So if yours is better than that, I'm interested. Any help would be greatly appreciated as I'm hoping to get the car on the road sometime this month. Also, when is the next tec day? Napa has them, they want $73.55. They catalog them as a front torque strut.
	I wanna go fast.