Fiero 308 from Norway

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hello!

I'm Thomas from Norway, I hope it's not a problem if i join your Canadian forum :) I'm new to Fiero's and US cars in general, but now i'm an owner and are looking for help and pointers for my build. By reading here it seems you are all helpful and knowledgeable so i'm shure i will get some helpful tips!

To start with, my english can be a little off, but i'm shure you will understand ;)

I am a certified vehicle technician and have previously worked in GM Europe's technical development center in R�sselsheim, but now I work for BASF (Glasurit & R-M Paint) as a paint technician. (So please, if you have any paint realated issues, dont be afraid to ask!)

So.. To get down to business! The Car, a 86 Fiero V6 with a good spec list! It was imported from Florida to Norway in 97 and have been sitting in a barn up to a couple of years ago when the previous owner started the build. I bought it a couple of weeks ago.

Spec list :

Drivetrain : Standard 2,8 4 speed, except for custom made uprated driveshafts (700hp)

Body : Ferrari 308 replica of unknown origin

Spaceframe : Sandblasted, primed and painted red.

Front Supension : HT Motorsports coilover kit, with wishbones, drop spindle(?) and poly bushings

Rear Suspension : HT Motorsports coilover kit, widetrack wishbones, dropspindle(?) and poly bushings

Brakes : 13" Wilwood brakes floating disks and e-brake

Interior : Well, everything is new or upholstered in leather. 6 point TRS harnesses. See pictures :D

  I also got MS3 Extra engine management and a intercooler for the build.

So as you can see, it still needs a lot, but except for the drivetrain the car is like new! It have not been driven since 1997.

Well, the body needs modifying and paint, but thats a enjoyable job.

So there are some challenges.. US engines are rare to find here except for 99-04 3400 v6's.

So guys.. Where should i go from here? 

B.R Thomas

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Eddy86 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 13 April 2015 Location: Norway Status: Offline Points: 2	Post Options Post Reply Quote Eddy86 Report Post Quote Reply Topic: Fiero 308 from Norway Posted: 13 April 2015 at 2:09am
	Hello! I'm Thomas from Norway, I hope it's not a problem if i join your Canadian forum :) I'm new to Fiero's and US cars in general, but now i'm an owner and are looking for help and pointers for my build. By reading here it seems you are all helpful and knowledgeable so i'm shure i will get some helpful tips! To start with, my english can be a little off, but i'm shure you will understand ;) I am a certified vehicle technician and have previously worked in GM Europe's technical development center in R�sselsheim, but now I work for BASF (Glasurit & R-M Paint) as a paint technician. (So please, if you have any paint realated issues, dont be afraid to ask!) So.. To get down to business! The Car, a 86 Fiero V6 with a good spec list! It was imported from Florida to Norway in 97 and have been sitting in a barn up to a couple of years ago when the previous owner started the build. I bought it a couple of weeks ago. Spec list : Drivetrain : Standard 2,8 4 speed, except for custom made uprated driveshafts (700hp) Body : Ferrari 308 replica of unknown origin Spaceframe : Sandblasted, primed and painted red. Front Supension : HT Motorsports coilover kit, with wishbones, drop spindle(?) and poly bushings Rear Suspension : HT Motorsports coilover kit, widetrack wishbones, dropspindle(?) and poly bushings Brakes : 13" Wilwood brakes floating disks and e-brake Interior : Well, everything is new or upholstered in leather. 6 point TRS harnesses. See pictures :D I also got MS3 Extra engine management and a intercooler for the build. So as you can see, it still needs a lot, but except for the drivetrain the car is like new! It have not been driven since 1997. Well, the body needs modifying and paint, but thats a enjoyable job. So there are some challenges.. US engines are rare to find here except for 99-04 3400 v6's. So guys.. Where should i go from here? B.R Thomas

Fieroman88 Members Profile Send Private Message Find Members Posts Add to Buddy List Moderator Group Executive Member Joined: 09 January 2011 Location: Canada Status: Offline Points: 298	Post Options Post Reply Quote Fieroman88 Report Post Quote Reply Posted: 13 April 2015 at 1:30pm
	What exactly do you want to do. Engine replacement?
	Fieroman88

Eddy86 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 13 April 2015 Location: Norway Status: Offline Points: 2	Post Options Post Reply Quote Eddy86 Report Post Quote Reply Posted: 13 April 2015 at 1:46pm
	Yes, the original 140bhp is not going to cut it. I would also appreciate some information of the parts i already have as i dont have the reciepts. I was thinking a late model 3400 with turbo. I am unfamiliar with drivetrain, clutches etc so i hope i could get some pointers of what to do with my build. All help and ideas would be appreciated :) B.R Thomas Edited by Eddy86

Linlor Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 28 May 2010 Location: Canada Status: Offline Points: 186	Post Options Post Reply Quote Linlor Report Post Quote Reply Posted: 11 August 2015 at 1:08pm
	Welcome to the replica world. It looks like you have a decent body kit on the car and you have some nice upgrades to the stock Fiero frame. There are several options for upgrades to the engine and transmission available to you. I would suggest you look for a drive train that is fairly available to you like the 3400 you mentioned. Another excellent site for Fieros is Pennock's fiero.nl. Click on the forum link and you will have more info than you could ever imagine on Fieros. There is another forum dedicated to replicas called madmechanics.com that might also provide you with some help. If you are looking for Fiero specific information though, Pennock's is the first place to start. I have a 308 replica as well and have posted some updates on here over the lastfew yeaers. I am a fdew weeks away from being on the road so very close to being done. I can relate to where you are now. I was there wondering what the heck I have gotten myself into..... Ask away on any questions and you can also email me directly as I sent you my email address if you have any 308 replica questions. Cheers Don
	Ferrari 308 Replica Prova 5000s Countach Replica