2.8l Fuel injection problems.

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hey guys, me again. Just wondering if anyone can help me out with a little problem i have ran into. Only 3 cylinders on my motor are actually getting gas and firing up. This is on the right side of the motor if you are looking at it from the front. the other three are getting tons of spark but no gas at all. I checked the injectors with an ohm meter and all the injectors were identical. I also checked the 6 wires going to the injectors through the junction plug just before the injectors and tested each wire for voltage while the motor was cranked over. 

The Pink and white (A) wire seemed to be constant power at 11.59V

Green (B) was at 0.15V

Blue (C) 0.15V

Orange (D) 0.00v This wire has nothing at all. Dont know if it needs to lol.

Dark Pink and White (E) around 9.7V and 9.9V

Beige (F) around 9.7V and 9.9V

If anyone could give me a hand with this that would be awesome. just seems to be one of those great wiring issues. thanks allot.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
3.1fiero Members Profile Send Private Message Find Members Posts Add to Buddy List Member Joined: 18 June 2009 Location: Canada Status: Offline Points: 20	Post Options Post Reply Quote 3.1fiero Report Post Quote Reply Topic: 2.8l Fuel injection problems. Posted: 07 October 2009 at 5:22pm
	Hey guys, me again. Just wondering if anyone can help me out with a little problem i have ran into. Only 3 cylinders on my motor are actually getting gas and firing up. This is on the right side of the motor if you are looking at it from the front. the other three are getting tons of spark but no gas at all. I checked the injectors with an ohm meter and all the injectors were identical. I also checked the 6 wires going to the injectors through the junction plug just before the injectors and tested each wire for voltage while the motor was cranked over. The Pink and white (A) wire seemed to be constant power at 11.59V Green (B) was at 0.15V Blue (C) 0.15V Orange (D) 0.00v This wire has nothing at all. Dont know if it needs to lol. Dark Pink and White (E) around 9.7V and 9.9V Beige (F) around 9.7V and 9.9V If anyone could give me a hand with this that would be awesome. just seems to be one of those great wiring issues. thanks allot.

Patrick Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 19 April 2008 Location: Vancouver Status: Offline Points: 5	Post Options Post Reply Quote Patrick Report Post Quote Reply Posted: 07 October 2009 at 5:28pm
	Did you check the fuses? There's one for each bank of injectors.

3.1fiero Members Profile Send Private Message Find Members Posts Add to Buddy List Member Joined: 18 June 2009 Location: Canada Status: Offline Points: 20	Post Options Post Reply Quote 3.1fiero Report Post Quote Reply Posted: 07 October 2009 at 5:57pm
	Im guessing they are located up front?

Patrick Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 19 April 2008 Location: Vancouver Status: Offline Points: 5	Post Options Post Reply Quote Patrick Report Post Quote Reply Posted: 07 October 2009 at 6:02pm
	The fuse panel under the dash.

3.1fiero Members Profile Send Private Message Find Members Posts Add to Buddy List Member Joined: 18 June 2009 Location: Canada Status: Offline Points: 20	Post Options Post Reply Quote 3.1fiero Report Post Quote Reply Posted: 07 October 2009 at 6:13pm
	is that one supposed to be a 5 ? lol.

Patrick Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 19 April 2008 Location: Vancouver Status: Offline Points: 5	Post Options Post Reply Quote Patrick Report Post Quote Reply Posted: 07 October 2009 at 6:16pm
	Is that what you have in there?

3.1fiero Members Profile Send Private Message Find Members Posts Add to Buddy List Member Joined: 18 June 2009 Location: Canada Status: Offline Points: 20	Post Options Post Reply Quote 3.1fiero Report Post Quote Reply Posted: 07 October 2009 at 6:36pm
	yup thats her. couldn't read the lettering anymore on the panel lol. shes running good now lol. I just need to figure out what is smoking a bit. think its a wire or something. time to go under her again. thanks a bunch, overlooked the fuse cause i thought all the injectors were one fuse. thanks again. hopefully now i can make it to the meet.

Patrick Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 19 April 2008 Location: Vancouver Status: Offline Points: 5	Post Options Post Reply Quote Patrick Report Post Quote Reply Posted: 07 October 2009 at 6:43pm
	Great, glad to hear all cylinders are firing again!