The Tech Session planned for Saturday May 5th will be Held at Blair and Angela's house.  It is located at 5523, 240th Street.  Start time will be 9am however if you contact Blair or myself and request an earlier start time, something may be able to be arranged.  Ultimately it is up to him and Angela.  Please bring whatever tools you have.  

People will be doing everything from,

Washing, Waxing, And Polishing. 

Tune Up Parts, Plugs Wires Rotors Caps.

Brakes.  Pads, Rotors, Calipers

Body Panel Swaps

Cooling and Heating systems checks and repairs

Oil Changes.  (Be sure to bring a way to remove your old oil, we don’t want to leave it at Blair’s)

I am bringing a spare door so that I can swap out the door on my car that that has had a tweak in it since the day I bought it. 

The directions below are from 152nd Street and 104th Ave in Surrey.   I am sure most people can figure out where they are going from the directions.  If you need further assistance please don't hesitate to email me.  capt@captfiero.com

Here are the pics from last year.

West Coast Fiero's Tech Session 2006 Blairs House

DSCF1828 640 X 480 63 KB	DSCF1829 800 X 600 74 KB	DSCF1830 640 X 480 78 KB	DSCF1831 640 X 480 76 KB	DSCF1832 435 X 600 49 KB
DSCF1833 800 X 446 75 KB	DSCF1834 800 X 560 78 KB	DSCF1835 800 X 600 76 KB	DSCF1836 640 X 415 56 KB	DSCF1837 450 X 600 72 KB
DSCF1838 640 X 480 74 KB	DSCF1839 640 X 432 58 KB	DSCF1840 640 X 480 64 KB	DSCF1841 800 X 453 62 KB	DSCF1842 800 X 494 76 KB
DSCF1843 640 X 480 77 KB	DSCF1844 640 X 377 55 KB	DSCF1845 800 X 600 72 KB	DSCF1846 800 X 490 75 KB	DSCF1847 640 X 480 83 KB
DSCF1848 640 X 480 68 KB	DSCF1850 640 X 480 69 KB	DSCF1851 450 X 600 59 KB	DSCF1853 640 X 480 72 KB	DSCF1854 640 X 480 74 KB
DSCF1855 640 X 480 66 KB	DSCF1856 640 X 480 74 KB	DSCF1857 640 X 480 70 KB	DSCF1858 640 X 480 77 KB	DSCF1859 640 X 480 70 KB
DSCF1860 800 X 600 72 KB	DSCF1861 640 X 480 69 KB	DSCF1864 640 X 480 67 KB	DSCF1865 640 X 480 73 KB	DSCF1866 450 X 600 44 KB
DSCF1867 450 X 600 52 KB	DSCF1868 640 X 480 69 KB	DSCF1869 800 X 600 55 KB	DSCF1870 800 X 600 79 KB	DSCF1871 800 X 600 72 KB
DSCF1872 640 X 480 59 KB	DSCF1873 800 X 447 61 KB	DSCF1874 800 X 464 56 KB	DSCF1875 800 X 439 61 KB	DSCF1876 800 X 492 72 KB
DSCF1877 800 X 584 72 KB	DSCF1878 800 X 506 63 KB	DSCF1879 640 X 480 67 KB	DSCF1880 800 X 586 51 KB	DSCF1881 800 X 487 63 KB
DSCF1882 800 X 600 76 KB	DSCF1884 800 X 600 71 KB	DSCF1887 800 X 552 53 KB	DSCF1888 800 X 429 49 KB	DSCF1889 800 X 491 45 KB
DSCF1890 800 X 635 62 KB	DSCF1891 462 X 600 37 KB	DSCF1892 800 X 464 44 KB	DSCN0892 600 X 450 46 KB	DSCN0893 600 X 450 43 KB
DSCN0894 600 X 450 62 KB	DSCN0895 600 X 450 56 KB	DSCN0896 600 X 450 58 KB	DSCN0897 600 X 450 43 KB	DSCN0898 600 X 450 62 KB
DSCN0899 600 X 450 55 KB	DSCN0900 600 X 450 40 KB	DSCN0901 600 X 450 40 KB	DSCN0902 600 X 450 41 KB	DSCN0903 600 X 450 53 KB
DSCN0904 600 X 450 47 KB	DSCN0905 600 X 450 39 KB	DSCN0906 600 X 450 43 KB

The tech sessoin is 5 days away, do you have your parts yet?

The weather is looking to be awesome at the Tech session.  I just got off the phone with Kim from the All Pontiac Club and he has invited us to attend with them a Napa sponsered car show in Port Kells on the 23 of June.  This does conflict with our day drive and Picnic.  So some discussion will need to take place for that event.

But back to the tech session.  I am also going to try and re-glue a fallen headliner at the Tech Session.  I may try it first at the house to make sure it works and then demo it at the Tech.

That is a possibility.

Now back to the Tech Session.   Are there any requests for tools that people want me to bring.   Impact Gun, Large Floor Jack.  If no one is going to need the gun or big jack I am going to leave them at home.  I plan on bringing my big socket set and basic wrenches.

Brian has asked that I bring the Impact Gun and Jack so I will load those up into the car this afternoon.  

Any self respecting car guy has a drain pan or 3, I will grab a pan or 2 and bring them.  I am some really neat 2.5 gallon pails that work well, they have clear sides so you can slosh the oil around and get a good idea of the quality of the oil you have removed as well as see any debris that was in the oil.