West Coast Fieros Homepage
Forum Home Forum Home » Technical Topics Forum » Technical Questions and Discussions
  New Posts New Posts RSS Feed - Burping coolant system
  FAQ FAQ  Forum Search   Register Register  Login Login

Burping coolant system

 Post Reply Post Reply
Author
Message
waynrayn View Drop Down
Newbie
Newbie


Joined: 06 April 2012
Location: Victoria BC
Status: Offline
Points: 6
Post Options Post Options   Quote waynrayn Quote  Post ReplyReply Direct Link To This Post Topic: Burping coolant system
    Posted: 06 April 2012 at 2:47pm

Hi there:

I'm in Victoria, on the island... I've just changed the non-A/C heater core on my 87 Fiero SE.

I'm now ready to "burp" the coolant system. There are several online descriptions of this that I've read, so I get the idea. But as I refill the thermostat housing and run the engine for a few moments several times to get the fresh coolant into the system, eventually what level should the coolant come up to in the housing? I.e. should it still be below the thermostat, when I push it back in? Or would this leave air in? Should the thermostat be immersed?

The thermostat itself has a rubber lip, a gasket, so it seals down tight on the metal lip inside, seeming to indicate that the coolant should be under it. But doesn't this leave air still inside?

Sorry for the novice question. Thanks...

Back to Top
bcampbell View Drop Down
Senior Member
Senior Member
Avatar

Joined: 14 November 2011
Location: Canada
Status: Offline
Points: 160
Post Options Post Options   Quote bcampbell Quote  Post ReplyReply Direct Link To This Post Posted: 06 April 2012 at 6:18pm
Originally posted by waynrayn waynrayn wrote:

Hi there:


I'm in Victoria, on the island... I've just changed
the non-A/C heater core on my 87 Fiero SE.


I'm now ready to "burp" the coolant system. There are
several online descriptions of this that I've read, so I
get the idea. But as I refill the thermostat housing and
run the engine for a few moments several times to get the
fresh coolant into the system, eventually what level
should the coolant come up to in the housing? I.e. should
it still be below the thermostat, when I push it back in?
Or would this leave air in? Should the thermostat be
immersed?


The thermostat itself has a rubber lip, a gasket, so
it seals down tight on the metal lip inside, seeming to
indicate that the coolant should be under it. But doesn't
this leave air still inside?


Sorry for the novice question. Thanks...



Someone correct me if I'm wrong but I think the coolant
needs to be filled to the top of the housing. The
thermostat probably has a rubber lip so that the coolant
is forced to flow through it rather than around (once
operating temp is reached, the stat will open and coolant
will flow more rapidly).

You're lucky you get to remove the thermostat for filling
your engine :). With my LX9 swap it took forever to get
the coolant filled. What part of Victoria do you live
in?
Back to Top
waynrayn View Drop Down
Newbie
Newbie


Joined: 06 April 2012
Location: Victoria BC
Status: Offline
Points: 6
Post Options Post Options   Quote waynrayn Quote  Post ReplyReply Direct Link To This Post Posted: 06 April 2012 at 8:04pm

Hi:

Yes, your answer appears correct from another posting I finally got at Pennock's Fiero forum:

http://www.fiero.nl/forum/Forum2/HTML/121993.html

... I'm in Saanich. Cheers...

Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.01
Copyright ©2001-2018 Web Wiz Ltd.