Doing a garage clean out.    No dibs, No holds, 1st come 1st to take it away.

misc box of engine brackets, dogbone mount, fuel rail with regulator,

V6 coolant crossover pipe, (the one behind the engine) 

 V6 timing cover

V6 water pump (used)

Will have a lot more to go, and will post as I pile it up.

I'll be working on this most of Tuesday and some of Wednesday, so feel free to drop by and dig around.

Non Fiero Items

Misc Computer Parts and towers.  (nothing new, all pretty much P3 era stuff)

Edit to add address incase you don't already know where I live. (most people do)

16908 104th Ave. Surrey

Phone 604-807-2623

New stuff to update, Air Compressor, Spoiler and Notchback Taillights.

Air COmpressor is GONE.

Notchback lights are both damaged, however if yours are really busted these are better than nothing.

Spoiler was going to get used as an air diffuser for the back of my V8 Fiero, however I don't have the time or resources to complete that part of the project.

I just want this stuff gone, first come first served.   If not picked up in the next 48hrs, it will be moved to the curb and the local scrap man will take at the very least the compressor.

The compressor ran my air impact gun very well.  Its a 1.5hp unit and can be attached to a larger reservoir tank for more capacity.  It goes from 0-100psi in less than a min.

Bose CD / Tape Player Combo from Chevy Venture Van, was thinking about trying to fit in a Fiero, but alas have given up on it.  Set of 4 speakers from the same Van.

2nd Car stereo is from an unknown Mazda or Nissan.

Going to have lots of Headlight bucket frames, no motors, but these will save your butt if you are in a wreck and need one.

Munci 4spd Slave Bracket.  (These are hard to find and expensive, every 4spd will eventually need this bracket as they are known to fail leaving you stranded without a clutch)

Muncie 4spd shift cable bracket.

Isuzu Slave cylinder Bracket.

Assorted Vacuum lines

3 old style lack stands. 

Desk Mat, this is a big plastic thing with little spikes.  You put it in front of your computer work station and your roll around chair won't dig into the carpet.

Logitech Racing is gone.  

V6 and 4cyl thermostat housings.  

Isuzu 5spd, trans is junk, but it has a perfect clutch release fork. As well as brackets and such that would make it worth saving for parts.  I know the syncho's were good as well as the bearings, I blew the diff out of it.

I found 1 2.8 Fiero head, looks to be in amazingly good condition.  I might be able to find a 2nd, but it your head has a busted stud in it, this would be a great time to find a "single" head, as most people don't like to get rid of heads in singles.  (whats the value in having one head)  Well in my books NONE.  SO come and take it before the salvage man takes it to be melted down.   I have also added a bunch of misc brackets, stainless coolant pipes, engine/ trans mounts and such to the pile.

Lots more will be added as I go through stuff.

Junk 2 GO Updated 11pm April 5th

1 800 X 600 218 KB	2 800 X 600 143 KB	3 800 X 371 132 KB
4 600 X 800 111 KB	5 800 X 600 104 KB	6 393 X 800 92 KB
GEDC0204 800 X 600 144 KB	GEDC0205 800 X 600 189 KB	GEDC0207 800 X 600 171 KB
GEDC0208 800 X 600 167 KB	GEDC0209 800 X 600 240 KB	GEDC0210 800 X 600 177 KB
GEDC0211 800 X 585 140 KB	GEDC0212 521 X 800 122 KB	GEDC0214 800 X 600 193 KB
GEDC0215 800 X 600 189 KB	GEDC0216 800 X 600 153 KB	GEDC0217 600 X 755 178 KB
GEDC0218 800 X 476 129 KB	GEDC0220 800 X 427 112 KB	GEDC0221 800 X 600 129 KB
GEDC0222 600 X 616 151 KB	GEDC0223 770 X 600 154 KB	GEDC0224 600 X 698 167 KB
GEDC0225 800 X 424 133 KB	GEDC0226 800 X 376 111 KB

 I'm calling the scrap man to pick it all up tomorrow or Sunday.  Stuff added

assorted VGA and KVM switchs for computers.

2x 19" Widescreen LCD monitors neither work, don't know why, don't care.     

Misc hoses and brackets.

Only stuff gone is the V6 head and the valve covers.  \