WTD: 84 engine/ECM harness |
Post Reply |
Author | |
fierosound
Newbie Joined: 27 March 2007 Location: Canada Status: Offline Points: 9 |
Post Options
Quote Reply
Topic: WTD: 84 engine/ECM harness Posted: 18 May 2014 at 2:46pm |
I kinda butchered my engine harness when went to carb on the Indy's SD4 race engine.
I basically removed the TBI related sensor components at that time. Now I'm looking at going back to a fuel injection system of sorts, and the logical place to start is with another 1984 STOCK 4-cylinder TBI wiring harness that will have all the sensor connectors etc in place. SO - I need a complete engine harness to ECM from a 1984 with A/C and Auto (manual OK too) Thanks, Tony - Calgary fierosound1@shaw.ca My 87 GT http://www.fierosound.com My Indy Pace Car below... Edited by fierosound |
|
fierosound
Newbie Joined: 27 March 2007 Location: Canada Status: Offline Points: 9 |
Post Options Quote Reply Posted: 22 May 2014 at 6:05am |
Still need one guys. Fiero Factory in the States wants what they probably paid for the parts car they're taking it off of. :( . Edited by fierosound |
|
fierosound
Newbie Joined: 27 March 2007 Location: Canada Status: Offline Points: 9 |
Post Options Quote Reply Posted: 10 June 2014 at 5:32am |
Got one out of Ontario for $40
Fiero Factory in Alabama wanted US$300 + shipping/handling Edited by fierosound |
|
Capt Fiero
Admin Group Founding Member Joined: 12 February 2007 Location: Canada Status: Offline Points: 4039 |
Post Options Quote Reply Posted: 10 June 2014 at 12:38pm |
You are the 2nd person today to have a major issue with the Fiero Factory. They charged a guy $1100 USD for a used 5spd Getrag then shipped it and they had stripped it of everything. No shift brackets, no shift arms, nothing, just a bare transaxle. When he called to complain they told him those parts are extra. I'll see if I can dig up the message.
|
|
Capt Fiero
88 Fiero GT 5spd V6 Eight Fifty Seven GT V8 5spd. |
|
Capt Fiero
Admin Group Founding Member Joined: 12 February 2007 Location: Canada Status: Offline Points: 4039 |
Post Options Quote Reply Posted: 10 June 2014 at 12:40pm |
Capt Fiero
88 Fiero GT 5spd V6 Eight Fifty Seven GT V8 5spd. |
|
monzaguy
Newbie Joined: 03 May 2014 Location: Canada Status: Offline Points: 9 |
Post Options Quote Reply Posted: 19 June 2014 at 11:13am |
Everything out of the U.S.A. (by the time they finish
tacking on the shipping and conversion) your looking at paying at least 50 percent more than the part cost. its no wonder they can offer FREE shipping to all American states. Canadians supliment their postage rates. |
|
ARTIC-1
Senior Member Joined: 14 October 2009 Location: Canada Status: Offline Points: 434 |
Post Options Quote Reply Posted: 19 June 2014 at 4:38pm |
Was at Pick-a-part on Saturday an that 85 Duke was still there.
Edited by ARTIC-1 |
|
SNOW MAN
87-GT/AUTO-2.8_ WHITE 88-TTop/ Duke-2.5. RED |
|
Capt Fiero
Admin Group Founding Member Joined: 12 February 2007 Location: Canada Status: Offline Points: 4039 |
Post Options Quote Reply Posted: 25 June 2014 at 4:37am |
Tony, you mentioned somewhere you got a quote from the Fiero Factory for a harness and it was a really inflated price to begin with, there id now a huge thread, on the Fiero Facebook group with another person having a huge bad deal with The Fiero Factory. He needed a Getrag trans badly. They charged him 1100 bucks for the Trans, plus shipping, and when he got it, all the shift linkage was removed, the slave bracket, the arm that the slave pushes on, even the VSS had been removed so he got a bare trans for $1100 bucks and it was a used unit with no real warranty. I can't believe Jeremy has changed the place so much since Ed Parks retired. At this rate it will be another Fiero business that ends up closing its doors. Its getting a HUGE bad reputation.
|
|
Capt Fiero
88 Fiero GT 5spd V6 Eight Fifty Seven GT V8 5spd. |
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |