Bent Clutch Fork?
Printed From: West Coast Fieros
Category: Technical Topics Forum
Forum Name: Technical Questions and Discussions
Forum Description: Got a technical question about your fiero? ask it here.
URL: http://www.westcoastfieros.com/forum/forum_posts.asp?TID=1767
Printed Date: 28 December 2024 at 12:29am
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com
Topic: Bent Clutch Fork?
Posted By: Wonderbar Tech
Subject: Bent Clutch Fork?
Date Posted: 08 March 2010 at 3:55pm
|
My '85 4-cylinder/5 speed had been experiencing the usual loss of clutch function, when one day the pedal went rock-hard, then dropped to the floor. I found the plastic piece had popped out of the release arm. After getting the car home, I used a bit of force to free the lever. Now I have a lot of play, and the clutch onlydisengages when the lever is rotated almost to its end-of-travel. I heard the Isuzu forks don't bend, but what else could it be? ------------- Real radios are mechanically tuned and glow orange inside. |
Replies:
Posted By: Patrick
Date Posted: 08 March 2010 at 7:05pm
|
Anything will bend or break given enough force. It's impossible for us to know how much force you might've used, so it's a tough call.
|
Wonderbar Tech wrote: