|
I have a 85 GT that has been an ongoing project for the last 3 years. I've really lost interest in it lately, mostly because I have another project goign right now. There is over 10 thousand just in new parts in this car.
1994 3.8L S/C swap just needs wiring figured out, have both harnests/ECMs
All mounts from West coast Fiero All OEM fuel pipes and fittings from WCF
Aluminum flywheel from WCF
Handmade headers and Y pipe from WCF
Underpulley from Pulley boys
All S/C bearings replaced and oil changed
Custom made dogbone mounting plate
MSD wire set custom lenght Custom programed PROM to remove autotrans, rev limiter and Passkey. Also EGR delete
Rings/bearings all replaced in engine, and complete reseal,
New oil pump, waterpump, custom ground roller cam and roller lifters new Corvette LT1 fuel pump installed/wired
4 speed manual with 0miles just rebuilt, all bearings and sincros
All aluminum subrame mounts, subrame sandblasted and powdercoated black.
Fiero store rear sway bar, all polly control arm bushings, Held Motorsports coilovers in rear (adj) Front lowering springs
New stock brake pads and crossdrilled rotors, 18" wheels and new tires rear, aprox 30% fronts.
Brand new Fiero store rack with upgraded bushings(not installed)
Factory sub, amp and all bits(not installed) 2 extra door pannels, brand new black Fiero store carpets and Mats. $500 MOMO steering wheel matches grey interior. Dash, glass, sunroof all in good shape. headliner and a pillars were redone in black swuade.
Much much more. I want this project to go to someone who will finish it and respect the car like I used to. Again the 3.8L conversion is NOT complete and the car does not run at this time. The motor was assembled with assembly lube and has oil in it. I turn it over by hand every few weeks and it will crank on its own, if you jump the starter. Ihave ALL bills for engine includin machine work. Original engine is also still available had 170K. If you are interested email please mailto:Tgerhard@shaw.ca - Tgerhard@shaw.ca and I will send you pics and answer any questions as best I can. I will also help with transport if required, have access to a flatbed. Car is in Kelowna.
|