Any Turbo Projects Here?
Printed From: West Coast Fieros
Category: Technical Topics Forum
Forum Name: Technical Questions and Discussions
Forum Description: Got a technical question about your fiero? ask it here.
URL: http://www.westcoastfieros.com/forum/forum_posts.asp?TID=2332
Printed Date: 25 April 2025 at 3:49am
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com
Topic: Any Turbo Projects Here?
Posted By: bill
Subject: Any Turbo Projects Here?
Date Posted: 24 February 2011 at 6:23am
|
Installing an intercooler in a Fiero is a difficult job, if you don't want to lose your trunk space, or chop holes in the engine cover. Best way is to run it up front, but even just sitting under the car gives some benefit. Without one, you can't really venture much beyond 10 PSI boost as the mixture heats too much and goes off 'bang'. If anyone is doing a project, I am selling the stock intercooler out of a Solstice GXP (I'm fitting a larger one to my car). It is the narrower one in the picture. If you are interested in a Pontiac intercooler in your Fiero, get in touch. Mine has only only about 3000 km on it.
------------- 1988 3.2 turbo Fiero 1957 3.4 in Jamaican MG 2009 2.0 Pontiac GXP coupe |
Replies:
Posted By: CFoss
Date Posted: 24 February 2011 at 12:05pm
|
I'm doing a project right now.
What are the dimensions of the ic? And the inevitable, how much $$$?
Thanks,
Chay ------------- 86 SE 3.4 |
Posted By: bill
Date Posted: 24 February 2011 at 12:37pm
I'll see if I can get a decent measurement. They are slightly smaller than the track width of the cars....
------------- 1988 3.2 turbo Fiero 1957 3.4 in Jamaican MG 2009 2.0 Pontiac GXP coupe |
CFoss wrote: