Technical Questions and Discussions - slave push rod length?

Print Page | Close Window

slave push rod length?

Printed From: West Coast Fieros
Category: Technical Topics Forum
Forum Name: Technical Questions and Discussions
Forum Description: Got a technical question about your fiero? ask it here.
URL: http://www.westcoastfieros.com/forum/forum_posts.asp?TID=2383
Printed Date: 25 April 2025 at 3:49am
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com

Topic: slave push rod length?

Posted By: sanj
Subject: slave push rod length?
Date Posted: 29 March 2011 at 5:27pm

Hey have izuzu trans 5 speed need to
know slave cylender push rod length or
where i cn buy one

Replies:

Posted By: Dawg
Date Posted: 29 March 2011 at 6:14pm

It's quite long, something like 5 inches. Not sure where you could buy one.

As a last resort, I could measure ours and make you one on my lathe.

The Dawg

-------------
You dream it up....I'll make it

Posted By: sanj
Date Posted: 29 March 2011 at 6:45pm

If u can get me a measurement thatd be
perfect . I can make one but just need
the size

Posted By: Dawg
Date Posted: 29 March 2011 at 10:27pm

OK.

It should be 5 5/8" long. I would use a 5/16 diameter rod and you need to make a nice smooth radius at both ends.

The Dawg

-------------
You dream it up....I'll make it