Print Page | Close Window

FS: 1986 Fiero GT 4.9l

Printed From: West Coast Fieros
Category: Buy / Sell
Forum Name: Complete Cars
Forum Description: A Place to sell or buy your Fiero. Please use FS: (for sale) WTD: (wanted) in the title of each post
URL: http://www.westcoastfieros.com/forum/forum_posts.asp?TID=2633
Printed Date: 23 November 2024 at 4:04am
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com


Topic: FS: 1986 Fiero GT 4.9l
Posted By: EdmontonFieros
Subject: FS: 1986 Fiero GT 4.9l
Date Posted: 15 August 2011 at 5:41am

 

Willing to accept trades (full/partial), but looking for 'family' type of car with fairly decent gas milage. ;)

Well after some thought the time has come to put my 86 up for sale – hard decision to make as I still have plans for the car, but I just don't seem to have the time to enjoy it anymore and it is just sitting (well I am driving it to work now when it is nics out just to put some miles on it). ;)

A great deal of time and money has gone into this car to make it as it now stands. Everything works 100% as it should; there are no little problems.

All the poop:

1986 Fiero GT, 4.9l, 5 speed with custom interior based on the 4th generation Firebird, PS, PB, PW, PL, cruise control, sunroof and remote start/keyless entry. Frame is good and not rusted.

Engine:
91 Cadillac 4.9 l which includes:
- new rod and main bearings
- new push rods, water pump, oil pump, starter, plugs, plug wires, distributor cap and rotor and a high performance coil
- steel rocker bridge installed
- polished, ported and decked heads
- intake polished and ported
- rebuilt injectors
- ECM reprogrammed for mods and swap

Transmission:
- Izusu 5 speed
- new bearings and seals
- modified flywheel for the 4.9 application
- Spec Stage 2 clutch
- Spare rebuilt Izusu 5 speed with spare axles included
- Spare (new) Spec clutch disc (not sure why I have this, but it is included).

Car:
- new tires (stock sizes) - however the backs are a little worn.  ;)
- Suspension rebuilt with poly bushings (KYB shocks/struts)
- new front and rear bearings
- Cradle has been solid mounted (Darrell Morse Aluminum)
- Darrell Morse strut bar
- Battery is new and has been mounted up front (WCF aluminum tray)
- New calipers, pads and all parking brake cables (these were done by GM - part of the recall)
- New clutch master and slave cylinders (slave has the MR2 mod)
- New windshield (PPG not the cheap China brand)
- New side window dew wipes (GM NOS not aftermarket)
- New trunk seal (aftermarket - Will's)
- New door, trunk and ignition locks - includes 2 sets of key (NOS GM)
- includes spare steering rack
- other misc spare parts as well (have to go through the boxes to see what it there). What I do know:

spare 4.9 injectors/fuel rail/heads/throttle body/alternator
brake booster, clutch master and slave (maybe a couple of slaves)
Also includes complete 2nd generation headlight assembly (just never got around to installing it)
11.25" brake upgrade brackets (includes turned hubs and bearings)
...and I am sure some other stuff once I got through the boxes.

Interior:
- F-body dash and console modified to fit – includes all working F-body controls and switches.
- Clarion stereo (MP3, WMA and built in hard drive) includes the custom backlit radio mount
- F-body seats (nice and comfy)
- Door panels are scratched built based on the F-body style using F-body parts (modified to fit)
- Compass and self dimming rear view mirror

Plus anything else I forgot.

The car great and was used as a daily driver for 2 years solid (all year, will also include extra rims with winter tires - one season on them) and has only been used off and on the last 2 years. All work done has been fully documented with picture and notes (which you can have if interested). Receipts are available from work done and all parts installed.

Starting price is at $10,900 – but will work with reasonable offers. PM or send me an email. <-- but not going to give it away either.   ;)











Replies:
Posted By: EdmontonFieros
Date Posted: 05 September 2011 at 2:37am
Has been sold - thank you for your interest.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.01 - http://www.webwizforums.com
Copyright ©2001-2018 Web Wiz Ltd. - https://www.webwiz.net