Parting car
Printed From: West Coast Fieros
Category: Buy / Sell
Forum Name: Everything Else Wtd or FS
Forum Description: If it doesn't fit into the above - it goes here
URL: http://www.westcoastfieros.com/forum/forum_posts.asp?TID=2906
Printed Date: 22 November 2024 at 8:41pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com
Topic: Parting car
Posted By: Mumbles
Subject: Parting car
Date Posted: 01 May 2012 at 6:01pm
|
Hey, I have an 87 SE Fiero, mostly
complete (I've taken a few parts for myself), sunroof, blue exterior, interior is currently stripped out, I need to get rid of the car in the near future as I just found out i'm going in for knee surgery on both knees in two weeks and will be out of commission for a minimum of 9 months and need the space to store my 88 Formula. The SE is currently not running though only due to a couple of parts I removed to keep the formula going, It does not pass aircare by a long shot though and has a heavily modded engine. If anyone wants parts off of it let me
know what your looking for and I can send you a pic all parts are
best offer. Car is located in Coquitlam near Lougheed center. I do have a front license plate holder, I know i saw someone on here was looking for one Thanks, Ryan |
Replies:
Posted By: Capt Fiero
Date Posted: 01 May 2012 at 10:05pm
|
Sounds like Smurf's old car. Blue 87 SE V6 5spd, forged pistons, engine was bored out, big cam installed. I belive he even painted part of the engine blue? At one time he had 20" wheels on it which I think we replaced with black 15" 88 Lace wheels. If this is the same car, what condition is the engine in, aside from failing air care. ------------- Capt Fiero 88 Fiero GT 5spd V6 Eight Fifty Seven GT V8 5spd. |
Posted By: Mumbles
Date Posted: 01 May 2012 at 10:09pm
|
aye this is the same car, engine should still be in good condition, it has been sitting but ran well last I fired it up. I still have the 88 lace rims which i'll be keeping, will be posting the 20"s back up again if anyone is interested (otherwise i'll toss them on craigslist) the intake is painted blue (instead of the usual red) I'd hoped to put some more work into it to get it back on the road again but i need the space and wont be able to work on it for quite a while |
Posted By: tk_85redgt
Date Posted: 03 May 2012 at 7:32pm
|
which 5 speed do u have getrag or isuzu.I'm looking for a getrag 5 speed,shifter and cables. tino |
Posted By: hedoerks
Date Posted: 04 May 2012 at 12:18am
|
Hi Ryan
I'm looking for a driver door mirror and I'm also looking for a front license plate holder. Let me know if you have either one of these. Cell:604-308-7283 ------------- Henry Doerksen |
Posted By: Romeo
Date Posted: 06 May 2012 at 8:20pm
|
How much would you like for the engine? And if possible, any chance you could fire it up to ensure it still runs? ------------- Never shift into reverse without a back-up plan. |
Posted By: Mumbles
Date Posted: 07 May 2012 at 5:32pm
|
tk_85redgt its a getrag 5 speed, grinds going into 2nd or third though, I cant remember which, hedoerks have the drivers mirror (paint is quite faded) and front license plate holder, excellent condition Romeo I'll try get it running on the weekend, i'll let you know how it goes also of note is a set of 2" lowering springs for 84-87 fieros (in box, never used) |
Posted By: Romeo
Date Posted: 07 May 2012 at 6:50pm
|
Thanks, sounds good. ------------- Never shift into reverse without a back-up plan. |
Posted By: tk_85redgt
Date Posted: 07 May 2012 at 8:15pm
|
Ok thanks but i order a new clutch for me 4 speed so i'll stay with it thanks. tino |
Posted By: bcampbell
Date Posted: 08 May 2012 at 6:05pm
|
How much do you want for the lowering springs?
Edit to add: And would you be willing to meet me at Tsawassen or ship them? ------------- '86 2m6 F23 5-speed, LSD, 3.5L LX9 '89 Firebird 3500T, T56 |
Posted By: Fire451
Date Posted: 10 May 2012 at 11:02pm
i know that motor has 60 over forged pistons and a comp cams 260H cam in it (I sold them to smurf when he was building the motor), with a good intake system and 19lbs injectors it should make good power... who ever buys the motor will be getting a damn good motor. ------------- 
|
Posted By: Romeo
Date Posted: 11 May 2012 at 2:48pm
|
Assuming it runs... ------------- Never shift into reverse without a back-up plan. |
Posted By: Mumbles
Date Posted: 20 May 2012 at 6:15pm
|
Hey guys, sorry for the slow response, ive been a little slow to get
moving again. Im back at home now, havent had a chance to try and start the engine yet but im going to give it a shot as soon as im able, or can get a friend over to help. How does 200 sound for the springs? Best i could find was a little over 300 in the states Thanks, Ryan |
Posted By: bcampbell
Date Posted: 20 May 2012 at 6:33pm
|
Would you be willin to meet me at tsawassen to pick up the springs?
Also, do you know the spring rate? What brand? ------------- '86 2m6 F23 5-speed, LSD, 3.5L LX9 '89 Firebird 3500T, T56 |
Posted By: Mumbles
Date Posted: 21 May 2012 at 2:43pm
|
They are ST Suspension springs, i couldnt find a spring rate on the box
though. I could do 150 if you are able to pick them up. It'll still be a while till im able to drive again I have pictures as well if you want them just pm me an email address Thanks, Ryan |
Posted By: bcampbell
Date Posted: 25 May 2012 at 10:23pm
|
Hmm I think I will have to pass but thanks anyways. A
ferry trip costs about $150 so that effectively doubles the price for me. ------------- '86 2m6 F23 5-speed, LSD, 3.5L LX9 '89 Firebird 3500T, T56 |
Posted By: bcampbell
Date Posted: 25 May 2012 at 10:24pm
|
Actually do you have a V6 tach as well? ------------- '86 2m6 F23 5-speed, LSD, 3.5L LX9 '89 Firebird 3500T, T56 |
Posted By: Mumbles
Date Posted: 26 May 2012 at 1:13pm
| yup, still installed in the car |
Posted By: bcampbell
Date Posted: 27 May 2012 at 7:51pm
|
hmm would you be willing to ship it and if so how much? ------------- '86 2m6 F23 5-speed, LSD, 3.5L LX9 '89 Firebird 3500T, T56 |