transmission leakage at drain bolt
Printed From: West Coast Fieros
Category: Technical Topics Forum
Forum Name: Technical Questions and Discussions
Forum Description: Got a technical question about your fiero? ask it here.
URL: http://www.westcoastfieros.com/forum/forum_posts.asp?TID=3014
Printed Date: 22 November 2024 at 8:41pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com
Topic: transmission leakage at drain bolt
Posted By: Rob N.
Subject: transmission leakage at drain bolt
Date Posted: 07 August 2012 at 12:29pm
| Hi, I've changed my fluid in my GT (manual 5 spped) and the drain bolt was realy torqued on. I've re torqued it to the right specs and now I have a slow drip. Is there suppose to be a crush washer ? I' can't see one in the books that i have. |
Replies:
Posted By: Dawg
Date Posted: 07 August 2012 at 3:00pm
|
Get some thick gasket material from Lordco and cut yourself a
"washer". No more leak. Dawg ------------- You dream it up....I'll make it |
Posted By: Rob N.
Date Posted: 07 August 2012 at 8:29pm
| I was thinking of a soft alumin washer or a copper crush gasket. But I'll try the gasket material first. Just wondering if there was an SB on it .. |
Posted By: karnak
Date Posted: 07 August 2012 at 9:24pm
this might help...  |
Posted By: Rob N.
Date Posted: 08 August 2012 at 6:04pm
| aha! I knew it seemed like some thing should be there! Wonder if it's steel or copper? |