Technical Questions and Discussions - 88 GT rear wheel bearing

Print Page | Close Window

88 GT rear wheel bearing

Printed From: West Coast Fieros
Category: Technical Topics Forum
Forum Name: Technical Questions and Discussions
Forum Description: Got a technical question about your fiero? ask it here.
URL: http://www.westcoastfieros.com/forum/forum_posts.asp?TID=3055
Printed Date: 22 November 2024 at 4:26pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com

Topic: 88 GT rear wheel bearing

Posted By: Medic
Subject: 88 GT rear wheel bearing
Date Posted: 04 October 2012 at 4:01pm

My rear wheel bearing is shot and I need a socket to take off the big nut. Anybody know what size that nut is? I have to buy a socket and need to know the size before I spend hours driving back and forth to get the right size deep socket..

-------------
88 GT Northstar 6 Spd

Replies:

Posted By: Dr.Fiero
Date Posted: 04 October 2012 at 6:00pm

30mm IIRC

Posted By: Capt Fiero
Date Posted: 04 October 2012 at 8:13pm

If you can make it to my place by 2pm tomorrow, you can borrow mine. I am leaving for Oregon tomorrow.

FYI, it must be a DEEP socket.

-------------
Capt Fiero
88 Fiero GT 5spd V6
Eight Fifty Seven GT V8 5spd.

Posted By: Medic
Date Posted: 08 October 2012 at 4:07pm

Done, it was the easiest wheel bearings I have done. Now if I can only
figure out that slow speed stall issue.........

-------------
88 GT Northstar 6 Spd

Posted By: Capt Fiero
Date Posted: 08 October 2012 at 5:17pm

Congrats on the Repair, as for the low speed stall issue I can't help you, Northstar programing is WAY above my head, I would check with a few guys on Pennocks, there are some Wizards with the Northstar stuff there.

-------------
Capt Fiero
88 Fiero GT 5spd V6
Eight Fifty Seven GT V8 5spd.