FS Linksys Power over Ethernet System $40
Printed From: West Coast Fieros
Category: Off Topic
Forum Name: Got something you want to talk about.
Forum Description: General Stuff that is not Fiero related. Life, computers, Just Stuff
URL: http://www.westcoastfieros.com/forum/forum_posts.asp?TID=514
Printed Date: 06 January 2025 at 6:12pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com
Topic: FS Linksys Power over Ethernet System $40
Posted By: Capt Fiero
Subject: FS Linksys Power over Ethernet System $40
Date Posted: 23 March 2008 at 5:28pm
I have it posted on Craigslist, but figured some of the club guys might be interested. You can run a simple Ethernet cable say out into a garage or building that does not have power, and use this setup to power your router.
Here is the Craigslist ad.
http://vancouver.craigslist.ca/sys/616169557.html - Link to Forsale Page
LINKSYS
Model: WAPPOE
MODEL- WAPPOE VENDOR- LINKSYS
FEATURES- Power Over Ethernet Adapter Kit
Simplify your network installations with power and data on one
cable!
The Linksys Power Over Ethernet Adapter Kit lets you put your access
points almost anywhere, by removing the requirement of nearby power
outlets. By using the existing Category 5 Ethernet cabling to
deliver power to any standard 5 volt access point or other network
device, you save the time, hassle, and expense of running AC power
to the access point's installation location.
The best position for a wireless access point is usually on the
ceiling, in the center of the area to be covered. Second best would
be high on a nearby wall. Unfortunately, there's usually no easily
accessible AC power plugs available in these locations. With the
Power Over Ethernet Adapter Kit, installing the access point in
these preferred spots becomes far less trouble.
The Power Over Ethernet Adapter Kit is a two piece set. The
"Injector" sends both power and data over one Category 5 cable to
your access point, wireless router or bridge. Then the tiny
"Splitter", placed at the remote location, separates the network
data and DC power back into two cables, and delivers them to the
access point. The Injector can also be used by itself with POE-
enabled network devices that accept 48 volts directly on a POE
port.
When it's time to expand your wireless network, let the Linksys
Power Over Ethernet Adapter Kit simplify your installation.
* This product is compatible with the following Linksys products:
BEFW11S4 Ethe rFast Wireless AP + Cable/DSLRouter with 4-Port Switch
WAP11 & nbsp; Wireless Network Access Point
WAP54G Wireless-G Access Point
WET11 & nbsp; Wireless-G Ethernet Bridge
WET54G Wireless Ethernet Bridge
WAP55AG ;Dual-Band Wireless A+G Access Point
WAP51AB ;Dual-Band Wireless A+B Access Point
BEFSR41 ;EtherFast Cable/DSL Router with 10/100 4-Port Switch
BEFSR11 ;EtherFast Cable/DSL Router
BEFSR81 ;EtherFast Cable/DSL Router with 8-Port 10/100 Switch
HPRO200 ;HomeLink Phoneline 10M Cable/DSL Router
BEFVP41 ;EtherFast Cable/DSL VPN Router with 4-Port 10/100 Switch
www.linksys.com
-------------
Capt Fiero
88 Fiero GT 5spd V6
Eight Fifty Seven GT V8 5spd.
|
|