V6 Block
Printed From: West Coast Fieros
Category: Buy / Sell
Forum Name: Engines / Transmissions and Related Parts
Forum Description: Please use FS: (for sale) WTD: (wanted) in the title of each post
URL: http://www.westcoastfieros.com/forum/forum_posts.asp?TID=721
Printed Date: 01 March 2025 at 12:11am
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com
Topic: V6 Block
Posted By: Roadfury
Subject: V6 Block
Date Posted: 28 June 2008 at 8:21pm
|
hey, im looking for a dirtcheap/free block that has critical destroyed inyards. I would prefer for the exterior to not by broken..... RUSTY=OKAY Don't worry im not planning on selling anyone a broken engine.... im tring to make something... a little more practical that scrap metal....... ------------- 
|
Replies:
Posted By: Capt Fiero
Date Posted: 28 June 2008 at 10:03pm
|
Sorry I sent 2 or 3 scrap motors to the scrap metal department. I would send a PM to Dr. Fiero, or Blair, either of them might have a blown up motor kicking around. ------------- Capt Fiero 88 Fiero GT 5spd V6 Eight Fifty Seven GT V8 5spd. |
Posted By: Blair
Date Posted: 29 June 2008 at 7:31am
| Theres a 2.8 engine just pulled from a Fiero here. just missing intake top. take it quick and it's free. There's a 2.5 as well. |
Posted By: Matt
Date Posted: 29 June 2008 at 8:47am
|
How's the starter/flywheel on the 2.5L?
------------- I wanna go fast. |
Posted By: Dr.Fiero
Date Posted: 29 June 2008 at 9:58am
No dice here - I also tossed all my engines. Anyone have a Nissan/Isuzu/KUBOTA 4cyl Diesel kicking around though? :) |
Capt Fiero wrote:Posted By: Roadfury
Date Posted: 29 June 2008 at 10:06am
|
okay blair ill take it, can you PM me your address? Ill pick it up today if your free. -------------
|
Posted By: Roadfury
Date Posted: 29 June 2008 at 10:07am
|
Uh oh... sounds like someone is stealing my idea for when my bronco engine dies..... -------------
|
Posted By: Dr.Fiero
Date Posted: 29 June 2008 at 10:48am
I steal nothing....  Nah, it's for a generator. |
Posted By: ZeroC
Date Posted: 29 June 2008 at 3:00pm
|
Coffe Table ? ..that was my plan as well ...thats why i asked you for one dave lol :) ------------- 
|
Posted By: marcelvdgn
Date Posted: 30 June 2008 at 1:27am
|
Try this for an example. I guess if the engine is toast, might as well make a coffee table winre rack out of it. But it hurts to see one aluminum 215 cu in v8 sacraficed....Marcel
------------- Marcel 86SE V6 Auto 85SE V6 Auto 85 2m4 soon to be sleeper 3.8sc 5 speed |
Posted By: Matt
Date Posted: 30 June 2008 at 1:57am
|
Bet that would be tough to move.
------------- I wanna go fast. |
Posted By: marcelvdgn
Date Posted: 30 June 2008 at 10:49pm
|
the bare aluminum block weighs only 40 lbs. these engines completely dressed, carb,dist,starter,oil and water pump, only weigh 320 pounds i would really like to engineer one of these in a fiero M ------------- Marcel 86SE V6 Auto 85SE V6 Auto 85 2m4 soon to be sleeper 3.8sc 5 speed |
Posted By: Dr.Fiero
Date Posted: 01 July 2008 at 7:28am
|
Put one into a 1980 TR7 (effectively making it a TR8). Blew me away that when the block was sitting on the stand and needed to be moved off - just stuff ONE arm through a cylinder hole, and carry it away!  |
Posted By: Matt
Date Posted: 01 July 2008 at 9:27am
 I just had this image of you pretending to be like Bruce Willis from Unbreakable, having an engine on one arm and going, "give me another."------------- I wanna go fast. |