![]() |
NEW FELTS FOR THE WINDOWS! |
Post Reply ![]() |
Author | |
Claycam ![]() Member ![]() Joined: 28 August 2011 Location: Canada Status: Offline Points: 57 |
![]() ![]() ![]() ![]() Posted: 08 September 2011 at 3:26pm |
Hi Folks, I'm new to the Forum and this is my first Fiero. (GT 86) I skinned
the door to replace the door locks. Now I want to change all the felts and water seals on my door windows. I'm strictly backyard guy so a little help from some seasoned "Fiero Lovers" would be great. To me it looks like I have to pull the glass? In that case off to the garage... Thanks in advance! Clay in Vancouver Canada |
|
![]() |
|
Indy ![]() Newbie ![]() Joined: 14 October 2010 Location: Canada Status: Offline Points: 37 |
![]() ![]() ![]() ![]() |
I presume that you are mainly talking about the "dew wipes" located at the top of the door. I changed mine a few months ago. Not very complicated as long as the door skin is still off. Give me a call at 604-986-8199 and I will walk you through it. Gary in Edgemont Village, North Van. |
|
![]() |
|
Bassman ![]() Senior Post God ![]() ![]() Sir Brian Joined: 12 February 2007 Location: Canada Status: Offline Points: 2501 |
![]() ![]() ![]() ![]() |
I wish I took video of Randy when he did my dew wipes YEARS ago...window and all still on, he shifted the window a little and was able to get at the screws and change them...was done in an hour...lol
|
|
Brian (Bassman)
86 GT Fastback 3.2L 2013 Mazda3 Sport GS SkyActive [IMG]http://i170.photobucket.com/albums/u243/Bassman68/BassmanSignature.png"> |
|
![]() |
|
Claycam ![]() Member ![]() Joined: 28 August 2011 Location: Canada Status: Offline Points: 57 |
![]() ![]() ![]() ![]() |
No not those ones guys, sorry for not being clear but it's not the dew wipes. I
am talking about the felts inside the door! That adjust and keep the glass against the dew wipes. |
|
![]() |
|
Bassman ![]() Senior Post God ![]() ![]() Sir Brian Joined: 12 February 2007 Location: Canada Status: Offline Points: 2501 |
![]() ![]() ![]() ![]() |
Ya, he did mine the same time, either way once done it's a nice fix
![]() |
|
Brian (Bassman)
86 GT Fastback 3.2L 2013 Mazda3 Sport GS SkyActive [IMG]http://i170.photobucket.com/albums/u243/Bassman68/BassmanSignature.png"> |
|
![]() |
|
Claycam ![]() Member ![]() Joined: 28 August 2011 Location: Canada Status: Offline Points: 57 |
![]() ![]() ![]() ![]() |
Bassman, Are you saying Randy knows how to get at the felts in place? If
thats so, Can you put "Randy" in touch with me? |
|
![]() |
|
Bassman ![]() Senior Post God ![]() ![]() Sir Brian Joined: 12 February 2007 Location: Canada Status: Offline Points: 2501 |
![]() ![]() ![]() ![]() |
I have no idea where Randy is, no longer a member...Gary will figure it out for sure, he was great help recently for me:)...
|
|
Brian (Bassman)
86 GT Fastback 3.2L 2013 Mazda3 Sport GS SkyActive [IMG]http://i170.photobucket.com/albums/u243/Bassman68/BassmanSignature.png"> |
|
![]() |
|
Claycam ![]() Member ![]() Joined: 28 August 2011 Location: Canada Status: Offline Points: 57 |
![]() ![]() ![]() ![]() |
![]() makeshift garage. We managed to change the passenger side interior felts. Gary's some-what-organic approach to getting at those two very hard to get at screws on the outer dew wipes. Once the dew's where out of the way the window had more movement and Gary was able to finagle the felt guide in upside-down then turned it 90 degrees and then flipped it upright with a piece of hanger wire. That pretty much did it. I'll get the drivers side tomorrow. Thanks again guys... |
|
![]() |
|
Patrick ![]() Newbie ![]() Joined: 19 April 2008 Location: Vancouver Status: Offline Points: 6 |
![]() ![]() ![]() ![]() |
Gary's a good guy. He's demonstrated many times that he's more than willing to share his knowledge that he's acquired over the years working on all kinds of different cars.
|
|
![]() |
Post Reply ![]() |
|
Tweet |
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |