Harrison�s 88GT 3800SC1

So inquiring minds want to know, what are you plating?

Sounds awesome.   Can't wait to see the results of it all.

  Now that Lisa and I are out here in Abby, I need to have you over one of these days for Coffee.   I'd love to pick your brain about that LSD you put in your Getrag.     I am curious if it makes the transaxle stronger to any degree.    Seeing as I have the trans just sitting out of the car in the corner if I was going to do it, now would be the time.   Just don't want to toss in a bunch of time and money if the transaxle is going to explode just as fast as I am expecting it to.

Sounds good Dave, I work just off Sumas so could stop by after work sometime.

I have not had any time to fix it yet, been pretty busy lately. First band looks to be green I'm pretty sure, especially compared to the other ones that do have a black band. I'll try looking for a number somewhere on the board and seeing if that leads me anywhere.

Still making progress.

Finally got everything set up for zinc plating, it's putting zinc on things, but not as nicely as I would like, so still need to play with it some more.
Power supply had a dead transistor, so once I figured that out I got t working again.



I have repainted both radiator crossmembers and crashbar. Cleaned up and reinstalled the wiring harness and headlight module, as well as the crashbar.



I've also cleaned up a bunch of other parts, radiator shroud and fan, some rubber bits, I painted the windshield cowl, and also one of the wheel well liners, but not sure if I'll do the rest, I'll see how the one holds up.

I won't have time to do much at all to the exterior of the car, so it will still have a super scratched up roof and rock chips peppering the whole front end at the PPPCC show.

I still need to figure out if my radiator was leaking, and re run my new battery cables and it would be driveabable.

Edited by D_sensitized - 24 August 2017 at 11:22pm

I did get my car back together for the pontiac show, but haven't done much with it since.
Here are some more photos, I ended up running out of time to get all the last nuts and bolts plated, and when I get around to figuring out how to make it shinier, I will pull a bunch of the visible ones off and re plate them eventually.









I also got rid of the power distribution block by the C500 connector and all of the fusible links. Most of those wires were getting worn and corroded and giving me issues. They all got power from through the firewall and went right back into the firewall after anyway. So added a fuse box inside my centre console to replace the fusible links.



This is also the last time I'll be using photobucket, so hopefully I'm far enough from my limit they don't screw up all my existing photos.

Edited by D_sensitized - 27 July 2017 at 12:48pm

D_sensitized wrote: This is also the last time I'll be using photobucket, so hopefully I'm far enough from my limit they don't screw up all my existing photos.

Well poo.

I'll have to make some time to go back and fix it all.

Imgur seems to be what a lot of people recommend. So that's what I have switched to.

Flickr seems to be another good one, ken uses it, but I never have.

I'll check to see if I have any plastic mirror here anymore. See you at Captains. ...?